Motorcycle pre-ride inspection checklist

The motorcycle ride begins well before you hit the road. That is because you need to ensure that your bike is in a good condition and everything is working fine. This is important because having your bike break down in the middle of the road while you are going to an interview or perhaps while you are going on a road trip is the last thing you would need. Thus, in order to make sure that you don’t find yourself in such a messy situation it is always a good idea to follow a motorcycle pre-ride inspection on a regular basis. In order to help you with that, here is a checklist that you can use to get the job done easily.

  • Check the engine oil

This is very basic yet crucial. The engine oil is the blood of your bike that needs to be checked regularly. If the engine level has dropped, you can top it up. If it has become darkened, it is advisable to change it as soon as possible. You can go with a synthetic variant of engine oil since it lasts longer than the regular one.

  • Check the brakes

This is important because brakes can be the difference between life and death. Make sure they are working fine before riding off and change the brake pads on a regular basis. Also, ensure that the brake levers are sufficiently lubricated.

  • Monitor the tyres

The tyres face a lot of wear and tear than any other part of the bike. It is advisable that you check them daily for any tear, cracks or damage. Also, do ensure that the pressure is right in the tyres. You can also use Nitrogen in lieu of normal air which regulates the tyre pressure better in harsh climatic conditions.

  • Battery

The battery needs to checked regularly especially during the monsoons. This holds greater importance if the bike only has an electric start without a kicker. Additionally, you should go for a dry battery which has low maintenance.

  • Clean the spark plug

The ignition of the bike is dependent on the proper functioning of the spark plug. In monsoons as well as in normal conditions moisture, tends to cause corrode it creating a problem in the ignition. Regular maintenance and checks will ensure that you don’t get stranded because of an ignition issue.

With the aforementioned checklist, you can be safe and secure to a great extent with your motorcycle. However, there are a lot of things that are beyond your control that can lead to an untoward incident. To counter this risk, it is crucial that you have a two wheeler insurance policy in place. With a 2 wheeler insurance cover, you can ride your bike with confidence and get freedom from worries.